Tag Archives: Baby

Crafting DIY - Cricut - Sewing

DIY Milestone Baby Blanket using your Cricut

January 10, 2018

Milestone baby blankets are everywhere. Learn how to use your Cricut Maker and Cricut EasyPress to create your very own. This post does contain affiliate links. Thank you for your support. 

I’m so excited to be joining the Inspire My Creativity Link Party each month until June this year. It’ll bring some new challenges which I always love. Link up your post below! This month is DIY anything your heart desires.

This DIY milestone baby blanket was so easy to create using my Cricut Maker and using my Cricut EasyPress to secure the iron-on. Begin by cutting your iron-on using my Design Space file. You’ll need to open it on a desktop then you can save it as your own file and cut from your tablet or phone.

Supplies

I cut out each number and I’ve also included the words month and months if you want to add that at the bottom. When using Cricut Iron-On, it’s important to remember to mirror the image. You’ll place it shiny side down on the mat and cut using the iron-on setting. Do not use the HTV setting with your Maker. For some reason it is cutting completely through. You just want it to cut the vinyl and keep the carrier sheet intact.You’ll remove all the negative space and then cut each month number so that you can space them on your blanket. When using the zcricut EasyPress, you need a hard surface and then a folded towel on that hard surface. You need something that is going to give a little so that all the edges will be securely adhered. You know you’ve gotten a great adhesion when you can see the materials texture.For Iron-On Lite, you’ll need a temperature of 305F and then press for 25-30 seconds. Give your items a good warm up beforehand and after you’re done pressing, turn your material over and press again for a few more seconds. Now you’re done. So super easy but it takes a little bit of time to get your numbers evenly spaced and to finish the edges of your material. You’ll never need to spen $40+ on a Milstone baby blanket again.These DIY baby milestone blankets are the best baby shower gifts you can give. They’re even better knowing you put your hard work into something so special.

Hosts

Meg  |  The Kusi Life
Candice  |  She’s Crafty
Jaclyn  |  The Dotted Nest
Victoria  |  Dazzle While Frazzled
Sydney  |  Tastefully Frugal
Lindsay  |  See Lindsay
Julia  |  The Quiet Grove

Crafting DIY - Cricut - Sewing

Make a Half Hexi Baby Blanket using a Cricut Maker

December 30, 2017

Have you ever wanted to make a baby blanket using a Cricut Maker? I’m here to show you how easy it is to create the Half Hexi Quilt and you have free access to make it when you buy your very own Cricut Maker.Make a Half Hexi Baby quilt using your Cricut MakerThis post contains affiliate links. This post is also sponsored by Cricut and all opinions are my own.

The Half Hexi Quilt pattern available in Design Space is seriously so easy. My least favorite thing to do when quilting is cutting fabric. Using the rotary blade on the Cricut Maker has changed everything I do. You will still need your cutting mat and hand-held rotary blade so don’t toss those out the window. Make a Half Hexi Baby quilt using your Cricut Maker

Supplies

The fabric I used is a mix of a few designers but it is mainly Cotton+Steel. Here are the links below to some of the fabrics I’ve used:

First things first, read all the instructions from the spec sheet before you cut your fabric.

Make a Half Hexi Baby quilt using your Cricut MakerSo I began by cutting my fabric into 12″ strips. I have learned since just to have the ladies at the cut counter do it for me, makes it a little easier. Load your fabric onto the pink cutting mat and begin cutting each piece. Make a Half Hexi Baby quilt using your Cricut MakerBecause my colors are different that the ones the project has labeled, just figure out which one you want and mark it on the spec sheet. This reference will make it easier to follow along. Be sure to watch the direction of your pattern on the quilt so that each pattern will be identical.Make a Half Hexi Baby quilt using your Cricut MakerOnce all your pieces are cut, it’s time to start assembling them. Lay out your cut pieces on the floor and arrange them how you want them to look. Basically each pattern will cascade diagonally down the quilt.Make a Half Hexi Baby quilt using your Cricut MakerOnce you have them laid out, gather them into rows. I sewed my pieces in a vertical pattern and then I was able to attach them all to each other. Start with each vertical pattern one by one. The thing I love about the Cricut Maker cutting the blanket for me was that each seam matched. The never happens when I’m cutting by hand.Make a Half Hexi Baby quilt using your Cricut MakerAfter I had the front of my baby blanket done, I payed down the backing of the blanket wrong side up. Then you’ll lay the batting down and lay the top on that. I used safety pins to hold it together and then quilted it on my Baby Lock Elizabeth machine. Just follow the seams and do a 1/4″ line along them. Make a Half Hexi Baby quilt using your Cricut MakerNow it’s time for the binding. Cut yourself some strips that are 2.5″ wide. Sew them all together to make one long strip. Sew the strip right sides together using 1/4″ seam along the edges of your baby blanket. Get out your iron and press the strip so that it is now hanging over the other edge. Press the other end into the middle of your strip and secure it with binding clips.Make a Half Hexi Baby quilt using your Cricut MakerThe bottom triangles are the hardest. Just finagle the fabric so that it’ll turn into a pointy edge. Or you can choose to cut the additional pieces and have the whole entire baby blanket have flat edges. Once your other end is secured with binding clips, you’ll hand sew the binding using this method.Make a Half Hexi Baby quilt using your Cricut MakerYou’re finished. This baby blanket took me a few hours and the assembly was really easy. Again, the hardest part I found was the points on the triangles at the bottom of the quilt. Tell me, will you make this baby blanket using your Cricut?

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.

Baby Malakai - Mother's and Father's Day

The perfect Fathers Day gifts for Dads of Preemies

June 12, 2017

This shop has been compensated by Collective Bias, Inc. and its advertiser. All opinions are mine alone. #NewDadMustHaves #CollectiveBias

Every new Father is important and we as mothers know what we need. But what do dads of preemies need? This post will highlight all the important items you need for your home for your premature baby.Any Dads of Preemies out there? Here are the best tech items for your baby.

Our son Malakai was born at 24.5 weeks gestation and it was a scary time for all of us, especially his dad. I’ve had 3/4 premature babies and I’ve never seen my husband so attentive to our babies in the NICU except Malakai. Of course he was concerned with all of them but none of them had the complications Malakai had. I’ve wanted to make a round-up of all the items that a dads of preemies need to put his mind at ease.Any Dads of Preemies out there? Here are the best tech items for your baby.

  • VTech VM981 Expandable HD Video Baby Monitor with 1 Wi-Fi Camera, 5” Touch Screen is the perfect video monitor to see your new baby at all times. It hooks up to your smart phone and a 5″ touch screen so you’re able to go from room to room with the comfort of knowing if your baby is ok. The VTech VM981 Expandable Video Monitor can zoom in 10X to your desired view and the picture is always crystal clear. Grab it on Amazon here.
  • White Noise Machines are important because they help clear out the silence. Preemies have been surrounded by alarms, talking, pokes and prods all while they were in the hospital, it’s important to have something that clears it all out.
  • Cool-Mist Humidifier, I say cool-mist because the warm-mist humidifier can be a burn hazard for children. The air is the same temperature when it hits your child’s lungs but the cool mist seems to be more effective for preemies.
  • Large Water Dispensers can be found at your local hardware store or in Utah they have a company that you can rent from. Some can deliver the large bottles to your home or you can fill it up at a local grocery store too. I like the large water dispensers because they have a hot and cold function. This is great for making bottles, just do half and half, or even warming bottles. Bottle warmers are handy but can cause hot spots just like a microwave.
  • Smart Thermometers can hook right into your headphone jack on your phone and you can get a reading for their temperature right there. It also saves the history of the fevers so that you can give our doctor an accurate report.

Any Dads of Preemies out there? Here are the best tech items for your baby.Technology is not necessary for everything but the items above are, in my opinion, an absolute must. These help your kids transition from hospital to home very easily. Dads of preemies everywhere are going to want these great items for their kids.Any Dads of Preemies out there? Here are the best tech items for your baby.For more information on the VTech VM981, visit VTech here and on Facebook. Now tell me, what’s your favorite tech items for babies?Any Dads of Preemies out there? Here are the best tech items for your baby.

Crafting DIY - Cricut - Party Time

How to make your own labels with Cricut

May 26, 2017

Did you know you can make your own custom labels with Cricut?
It’s so easy and made this Twin Baby Shower memorable.Make custom labels with your cricut exploreThis post contains affiliate links. Thank you to Cricut for sponsoring this post.

This baby shower that I helped throw for my friend was amazing! She just delivered her twins and I’m so proud of her – mainly because I can barely handle one infant, let alone two. When we had her baby shower, I wanted the girls to be able to take something with them when they left. We like to party simple so we just gave everyone a bag of popcorn adhered with labels we created using these super cute images from Cricut Design Space. I also made the mini onesie boxes and adhered a label using the same method. Links to the canvasses are at the bottom of this post.Create your own labels with Cricut and use them for parties all the way to plannersI didn’t want a piece of paper taped on our cellophane bags so I created super easy labels inCricut Design Space. Making labels with Cricut is so easy and it’s a feature I use often. For a step-by-step process on the Print-then-Cut method can be found here.Create your own labels with Cricut and use them for parties all the way to plannersFirst, choose your design and choose what shape you want your labels to be. I chose a white circle and placed the image on top of the circle. I then selected both shapes and attached them, then you’ll choose to flatten them. I did it for the green and the pink labels.Create your own labels with Cricut and use them for parties all the way to plannersNext, you’ll use the Printable Vinyl available online or at your local craft store. You can use the sticker paper but it’s too thick for me to pull through my printer and the vinyl is more flexible for the cellophane bags.Create your own labels with Cricut and use them for parties all the way to plannersBefore you fill your bags with popcorn, add your label you made with Cricut on to the front. Now add your popcorn and tie with your twine.Create your own labels with Cricut and use them for parties all the way to plannersFor the mini onesie boxes, I used the Sorbet Sampler Cardstock and cut the shape. I did use hot glue on the fold to be sure that it held together. I then filled them up with candy and looped them close. For the fronts, I cut out a circle using white glitter cardstock and adhered the label to that. For the font, I used Lemon Tuesday which is free for personal use. I love this font.Create your own labels with Cricut and use them for parties all the way to planners

Files:

I was invited to participate in the Cricut Party Blogger Program Kickoff.

This experience is based strictly on my opinion.  Others may have a different opinion or experience with the product listed above.  I was provided the sample free of charge by the company or PR agency and I have given my honest opinion.

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine and this post does contain affiliate links.

“>

Crafting DIY - Cricut - Party Time

Throw a Twin Baby Shower and decorate with your Cricut Explore

May 22, 2017

This twin baby shower was so exciting to throw for a dear friend of mine. She was expecting a boy and a girl so the neutral pastels were a given to the theme.Twin baby shower ideas using cricutThis post contains affiliate links. Thank you to Cricut for sponsoring this post.

I love a good baby shower but I love it even more when my friends are having babies and I can help throw a baby shower. My friend, Lisa, is expecting twins! A boy (who we’ve dubbed as Sample) and a baby girl whose name is yet to be determined. I like it even more when I get to use my Cricut and make the decorations for someone I know that will appreciate them. Lisa is super crafty and so I knew I had to go all out so that I’d make her jealous, lol. I’m going to show you my creations for our twin baby shower that I made with my Cricut Explore Air 2.Green and Pink baby shower ideasbaby shower centerpiece ideasSample baby nameFreshly picked for twinsOf course I had to gift the babies these adorable Freshly Picked moccasins and I had to tie in the onesies to make a complete outfit. I also used the Sorbet Cardstock pack that is available on Cricut.com so all my color inspiration came from that one pack that included 6 different colors. So perfect for a twin baby shower.baby shower table with cricutdrinks to serve at a baby showerboy and girl twin desserthow to decorate a dessert tableWhat to serve at a baby showerTwin baby shower dessert ideasWe decided to do a really simple menu that was just small finger sandwiches, fruit and a few desserts to choose from. For the drinks we did a sparkling lime-aid and some simple water with lemons in it. We served them in our drink holders that I got from Oriental Trading.twin baby shower with cricutTwin baby shower gift ideascricut onesie favor boxprint then cut with cricutTwin baby shower favor ideasI used a lot of the Print-then-Cut method for my labels on the onesie boxes and the popcorn bags. I’ve included the cut files at the bottom of this post that are available through Design Space. I used the font Lemon Tuesday so you’ll need to download that first. For the boxes I had some circles cut with the white glitter cardstock and placed the printable vinyl on top with the “Oh Babies” image to tie in the twin baby shower theme.

I just bought some clear cellophane bags and twine and filled it up with some popcorn and adhered the printable vinyl. I’m not going to go crazy for a favor when everything else is just too much. It’s the perfect ending to a fun night. If you’re ever in Salt Lake the best store to find all the paper and party supplies is called Pak-N-Wrap. This is also where I got the funky crepe paper banners. I know it has a name but I can’t remember what it’s called. How to make cricut flowersboy and girl twin baby shower ideasbaby shower dessert tabledessert table with cricutBy far the biggest project that I undertook was this banner. It was actually quite easy once I got all the pieces assembled.

Supplies:

  • Wooden Dowels
  • 2 Half Circle Styrofoam balls
  • sheet of Styrofoam
  • Styrofoam cutter
  • Adhesive Spray & Foam Dots
  • Paper

I cut the paper on the 12×24″ mat with the 12X24″ Sorbet paper sampler. Again, I used the Lemon Tuesday font and typed the saying “Oh Babies” and cut that using the White Glitter Cardstock. I cut a ton of the 3D Peony from the 3D Floral Home Decor cartridge and I cut them in various sizes and colors. I also cut additional leaves so that I’d have some smaller fillers. I recommend this cartridge because the flowers go together so easily.

Once they’re assembled, just start placing them on the foam half circles. I did place my dowel in beforehand so that I knew where I could get the flowers in a better position. I just put a ton of hot glue where the dowel was and let it set before i placed all the flowers.

Once your half circles are dry and assembled, you can add your banner. To assemble the banner, place the foam adhesive spray on your base paper and lay it on to the foam board. I used a special heat knife to cut the foam so I’d get a smooth edge, you can easily use a sharp knife. Just trace around the image and you’ll have the 3D design you desire. Once you have that all set, you can add the details to the banner. I added an extra peony to the banner as well to tie it in to the base. i put foam dots on the words and attached those last.

baby shower table with cricutHere are the files that link you to the images on Design Space.

Picture credit goes to the amazing Natalie at Beehive Photo.

I was invited to participate in the Cricut Party Blogger Program Kickoff.

This experience is based strictly on my opinion.  Others may have a different opinion or experience with the product listed above.  I was provided the sample free of charge by the company or PR agency and I have given my honest opinion.

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.

Baby Malakai

Summer Styling and Sun Care tips for Toddlers

May 9, 2017

This shop has been compensated by Collective Bias, Inc. All opinions are mine alone. #BlueLizardSummer #CollectiveBias

Learning how your child reacts to the sun is always a fun experiment! Even though they share the same genetics, siblings often times react differently to the sun. My older three brown right up and then you have my baby who burns just like his mama. I’m going to give you some of my best sun care tips for toddlers so buckle up!suncare tips for toddlersLearn the best sun care tips for toddlers and all the essentials you'll need for the sun.Learn the best sun care tips for toddlers and all the essentials you'll need for the sun.

We were in Tonga over the winter (their summer) and we had to leave early because Malakai couldn’t handle the heat. It was so hot, like Arizona heat but with 85% humidity hot. No fun. I’ve never experienced heat like that and hopefully I never will have to again. Malakai was extremely sensitive to the heat there too. I’m not sure if it had to do with his prematurity or if he had somehow contracted a mosquito-borne illness. He’d toss-and-turn all night long, never napped and he was pretty much the grumpiest he’s ever been. I needed to learn quickly how to take care of him in the sun.Learn the best sun care tips for toddlers and all the essentials you'll need for the sun.The only thing he ended up loving was being dipped in the ocean and then laying down in the shade. Obviously that wasn’t always an option so we had to get creative with how we dealt with him overheating. Some of my favorite ideas are:

  • Sunscreen and a higher SPF than you think you’ll need. Toddlers skin is still so fragile and thin that they need extra sun protection. Don’t be afraid to try the Blue Lizard® Australian Sunscreen out for yourself. How you take care of your skin when you’re young will determine how it looks when you’re older.
  • Rompers and lots of them. The fabric in these rompers are fantastic. They’re extremely breathable and come in different sleeve and pant lengths. These were a huge lifesaver in the heat and I ended up buying more of them once we came home.
  • Hats and large ones too. The wider the rim of the hat, the more area it’ll cover. I do like those hats that look like a towel is hanging down, but fashion over function for me and so I like to stick with bucket hats. Be sure that there is a strap to secure it on your baby’s head. But also make sure that the secure tab can easily come off, like a velcro one.
  • SPF proof swimwear in addition to your sunscreen. There is never too much sun protection and get all the coverage you can find. I love that swimwear now is available with additional SPF because you can’t always swim in long sleeves and pants.
  • Water, water, and more water. Toddlers need hydration as much as adults and they’ll feel miserable too if they don’t stay hydrated. There is always that rule of drink before you’re thirsty. Stay on top of it and be sure they’re getting the amount they need.
  • Washcloths. Dip these in the cool water and place it around your child’s neck. This has an immediate effect on how your body feels and it can help them get the energy they need so that you can get them out of the heat.

Learn the best sun care tips for toddlers and all the essentials you'll need for the sun.Learn the best sun care tips for toddlers and all the essentials you'll need for the sun.Babies and ourselves need a lot of sun coverage for our skin. In the last few years I’ve had moles removed which were on the cusp of being cancerous. I’ve been more diligent to cover myself and my children more because of this. Tonga was by far my worst sunburn and so while we were there I made sure to cover them in Blue Lizard® sunscreen before they even started for the day. I knew they’d run off to the beach and sunscreen would be impossible for them to remember.Learn the best sun care tips for toddlers and all the essentials you'll need for the sun.I love the Blue Lizard® Baby Sunscreen especially for Malakai’s sensitive skin and you can easily find it at your local Walmart. But the most important feature I love is that the Patented Smart Bottle™ technology – bottle changes color when exposed to harmful UV sunlight. This can be used as a great teaching tool for your kids on when to re-apply sunscreen (only the bottle will change colors). Just remember to consult your pediatrician before applying sunscreen to children younger than 6 months.Learn the best sun care tips for toddlers and all the essentials you'll need for the sun.Tell me, what are your favorite sun care tips for toddlers? Also don’t forget to download the Ibotta app where you can get a $4 rebate just for purchasing Blue Lizard® Baby Sunscreen.

Baby Malakai - Crafting DIY - Cricut - DIY - Home - Home DIY - Kids

Create your own Farmhouse style baby nursery art with your Cricut Explore

February 28, 2017

Nothing is cuter than the book ‘Where the Wild Things Are’, learn how to make this farmhouse baby nursery art inspired by the book.diy nursery art with cricutThis post contains affiliate links. Thank you to Cricut for sponsoring this post.cute boys nursery art

I love Malakai’s nursery decor above his crib. It’s eclectic, kind of farmhouse and it’s all the right tones. For this project I’m going to show you how to make this ‘Where the Wild Things Are’ baby nursery art sign using your Cricut Explore. And I’ve include the .png for you to save to your computer and upload it to your Cricut Design Space using this method. Let’s get started! diy farmhouse frame for baby

Supplies

First, prepare your wood surface. I used Rustoleum stain in Driftwood (it is now called Sunbleached). It’s the perfect neutral grey and I used it on my Hair Pin Leg DIY Side Table. I then added my base color to the inlay of the wood. I wanted my monster to be light so I painted the base in Ceramcoat Charcoalhow to weed vinylNext,  you’ll cut your image using the dial setting on vinyl. Using your weeding tool, peel up the monsters body. It’ll leave behind the lettering and that’s what you want.
how to apply transfer paper to vinylNext you’ll adhere your transfer tape. I love the Cricut transfer tape because it has a guide on it to ensure you get an even image transfer. I use my scraper to press out the bubbles in the transfer tape. how to apply vinyl to woodOnce your base coat is dry, place the vinyl image where you want it to be and be sure to press extra good while the transfer tape is still over the vinyl. This will ensure that you get a good seal and no paint will seep down.  how to stencil with vinylOnce you have the vinyl where you want and it’s sealed down onto your wood, slowly peel up the transfer tape. This will now expose the area of the monster that you’re going to be painting. For this color I chose Ceramcoat Quaker Grey.

Before you paint your chosen color of the monster, take the extra time to paint your base coat over the area first. This will give you crisp lines and will help to avoid any bleeding. how to use vinyl as a stencilAfter the base color had dried over the monster, apply your desired color. I used the stippling method to apply my paint because I wanted a rough texture. Almost mimicking fur. Now wait 20 minutes until it is completely dry before using your weeding tool to remove the vinyl from the wood. how to remove vinylhow to age a wooden signI decided to sand it a bit for a rough texture but this is completely optional. I also sanded around the edges of the frame to expose some of the wood.
where the wild things are nursery artThis goes so well with Malakai’s wall. I’ve listed the sources of the other art below for your reference.

I also love the versatility of the Cricut Explore Air 2. Not only does it look good in the minty green but it’s so functional for daily uses. We recently made Siaki a MLK, Jr. poster board for his biography report. He loved it and so did I because it was so easy.
cute baby nursery art

This post does contain affiliate links, thank you for your support.

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.

Baby Malakai - Birthday Parties - Party Time

The Boy Who Lived – A Harry Potter First Birthday Party

October 11, 2016

*This post does contain affiliate links, thanks for your support.Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas.Malakai had so much fun at his Harry Potter birthday party. What a better way to celebrate “The Boy Who Lived” than incorporating Harry Potter. We had lots of good ideas thanks to other Harry Potter birthday parties that have been thrown by others but it was fun to put a little spin on it.
Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas.

I just cut the top off of some greenery I grabbed from Ikea and glues it to the top of the babies heads. I used red velvet cake but you can get any kind you want. I especially love these Butterbeer Cupcakes from Sugar & Soul. I spread it with cream cheese frosting and dipped it in some brown sprinkles. You could also ground up some Oreos and dip them in to have it look like dirt.
Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas. I got these Honeydukes chocolate bar labels from Etsy here. They’re printable and a no brainer. They fit perfectly on Hershey bars.Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas. Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas. We had our local bakery make a replica of Hagrid’s cake and had them personalize it. I also especially love the Gryffindor smash cake. They just used a printable paper and I attached the little snitch on top. I also bought some paper stars that just added a pop to the Harry Potter table. They’re actual pages out of the book folded into tiny stars and they’re adorable. Grab them hereCelebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas. Get Away Today was a huge help in bringing all the decorations together. They had some Harry Potter candy from the original Honeydukes for us. They also lent us their Sorting Hat and scarves for our photo booth. I used some printable snitch wings and attached them onto some Ferrero Rocher candies and yum…
Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas.Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas.

Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas.Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas.Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas.Grab the balloons here and grab the confetti here. I just stuffed the confetti into the clear balloons and then took them to my local party store to fill up.


Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas. Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas.I used the large cauldron for drinks, the medium for the Harry Potter photo booth props and the small one to hold the extra candy along with the prop Harry Potter glasses. You can see Malakai’s Harry Potter Snitch invitation here.


I grabbed a lot of candies and props for the Diagon Alley area of the party from Oriental Trading.  Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas.here, here, here
The skull statue and the beakers are all from Michaels and I grabbed dowels, hot glue and brown spray paint while I was there and made some fun homemade wands. I got all the table linens from Oriental Trading as well.Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas. Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas. Celebrate 'The Boy Who Lived' with these Harry Potter birthday party ideas.